IMAGE ADJUSTMENT
J001/J003 3-18 SM
3.7.3 ADJUST PAPER FEED
Print the ‘Adjust Paper Feed Test Pattern’ and do this adjustment if you see broken
horizontal lines or uneven colors in the printouts:
1. Open the printer driver. (3.7.2)
2. In the Printer Properties window click “Maintenance”>”Adjust Paper Feed”
3. Do the instructions to print the test pattern.
4. Examine the test print. Then enter the number of the pattern that shows the
best appearance (the horizontal lines should be perfectly flat).
5. Do the instructions on screen to complete the adjustment.
G707R924.BMP
To Next Page
Loading...
Need help?
General
