Transport Belt Charge Adjustments
J007/J010/J011 4-46 SM
SP No. Menu Title Meaning
1152 CHG:W2:EDGE:11
Charge Width Setting: Duplex (LE/TE: Mj3: ID3) (Future
Use)
1153 CHG:W2:MIDL:11
Charge Width Setting: Duplex (MID: Mj3: ID3) (Future
Use)
1154 CHG:W2:EDGE:12
Charge Width Setting: Duplex (LE/TE: Mj3: ID4) (Future
Use)
1155 CHG:W2:MIDL:12
Charge Width Setting: Duplex (MID: Mj3: ID4) (Future
Use)
1156 CHG:W2:EDGE:13 Charge Width Setting: Duplex (LE/TE: Mj4: ID1)
1157 CHG:W2:MIDL:13 Charge Width Setting: Duplex (MID: Mj4: ID1)
1158 CHG:W2:EDGE:14 Charge Width Setting: Duplex (LE/TE: Mj4: ID2)
1159 CHG:W2:MIDL:14 Charge Width Setting: Duplex (MID: Mj4: ID2)
1160 CHG:W2:EDGE:15 Charge Width Setting: Duplex (LE/TE: Mj4: ID3)
1161 CHG:W2:MIDL:15 Charge Width Setting: Duplex (MID: Mj4: ID3)
1162 CHG:W2:EDGE:16 Charge Width Setting: Duplex (LE/TE: Mj4: ID4)
1163 CHG:W2:MIDL:16 Charge Width Setting: Duplex (MID: Mj4: ID4)
Adjustment of the charge pitch settings can prevent the occurrence of nozzle blockage
when printing on paper other than transparencies. (Adjustment cannot be done for
transparencies.)
4.6.5 CHECKING CHARGE PITCH APPLIED FOR THE PRINT
MODE
1. Check Table 3 to find print drive wave for the selected print mode (the print
mode selected in the printer driver determines the print drive wave form.) (Table
3)
2. Use SP5402 and SP5403 to check the printer temperature and humidity.
3. Select the print drive wave from the Temperature/Humidity Table, and then
determine the Charge ID from the temperature and humidity readings from
SP5402 and SP5403. (Tables 3-1 to 3-6)
4. Use the Charge Pitch Table to determine the charge pitch to be applied during
printing. (Tables 3-11 to 3-20)
The charge pitch settings are adjusted in mm units with absolute numbers.
Example: Changing the LE/TE Charge Pitch from 12 mm to 10 mm for Mj2 Side 1
Printing
To Next Page
Loading...
Need help?
General
