138
Wipe Snapshots
Chapter 5 Wipes
a)See page 132.
Replicating the wipe pattern (Multi)
1
Press [Multi] in the Key1 Wipe Adjust menu, turning
it on.
2
Set the following parameters.
a)See page 132.
Wipe Snapshots
You can snapshot and save a wipe pattern together with the
current settings of its modifiers and pattern limit in a
dedicated register for recall when required.
There are 10 wipe snapshot registers on each M/E bank
and the PGM/PST bank.
Use the menu to save and recall wipe snapshots.
Wipe Snapshot Operations With the
Menus
Menus used
As an example, when operating on M/E-1, select M/E-1
>Wipe >Wipe Snapshot.
The Wipe Snapshot menu appears.
Button displays
In setup you can select whether the memory recall buttons
show the pattern number or register name.
For details, see “Operation Settings (Operation Menu)”
in Chapter 19 (Volume 2).
Saving a wipe snapshot from the menu
1
Set up the wipe you want to save.
2
In the Wipe Snapshot menu, press [Store], lighting it
amber.
3
Press the memory recall button for the register in
which you want to save.
Knob Parameter Adjustment Setting values
1 H Multi Number of
repetitions of
pattern
horizontally
1 to 63
2 V Multi Number of
repetitions of
pattern
vertically
1 to 63
3 Invert Type Replication
layout
1 to 4
a)
Memory recall buttons
To Next Page
Loading...
Need help?
General