23
Basic Video Processing
Chapter 1 MVS-8000X/7000X Functions
frame, when these areas are filled with a separate image
selected from the utility 1 bus.
For details, see “Side Flags” (page 202).
Multi Program 2
By operating the switcher in Multi Program 2 mode, a
single switcher mix/effects bank can be used to create two
separate video outputs, referred to as “main” and “sub.”
You can set backgrounds, keys, and transitions for each of
main and sub. For example, during broadcast of sports
events, two versions of the scene can be provided as shown
below, and switched simultaneously.
Program output for “Main”
Program output for “Sub”
For details, see “Multi Program 2” (page 205).
Input source with aspect
ratio
Image to fill the side flag
areas (selected from utility
1 bus)
Turn the side flag
function on
Side flag area
Side flag area
Background A
Key (Key 1 to Key 8 are
available on the main side.)
Background B
Background A (signal from utility 2 bus)
Key (Key 2 to Key 8 are
available on the sub side.)
Background B (signal from utility 3 bus)
To Next Page
Loading...
Need help?
General