189
AUX Menu Operations / Status Menu
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
AUX Menu Operations
AUX Bus Settings
Making video process settings for an AUX
bus
1
In the Aux >Aux Bus menu, using any of the following
methods, select the AUX bus to which the settings
apply.
• Directly press the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob to make the setting.
2
Press [Video Process], turning it on.
3
Adjust the following parameters.
To return adjustment values to their defaults, press
[Unity].
Status Menu
The Status menu shows the following information.
• Operating status of the DME
Viewing the DME operating status
To view the DME operating status, press the top menu
selection button [STATS] in the menu control block.
This selects VF1 ‘DME Status’ and the Status menu
appears.
For each DME channel, you can see how the DME is being
used in the corresponding operation block.
The display background color also indicates the following
differences in the way in which a DME is being used.
Blue: The DME is currently being used in other than the
final program output.
Red: The DME is currently being used in the final
program output.
Knob Parameter Adjustment Setting values
1 AUX Bus AUX bus
selection
1 to 48
Knob Parameter Adjustment Setting values
1 Video
Gain
Video signal
gain
–200.00 to
+200.00
2 Y Gain Luminance
signal gain
–200.00 to
+200.00
3 C Gain Chrominance
signal gain
–200.00 to
+200.00
4 Hue Delay Hue delay –180.00 to
+180.00
5Black
Level
Black level –7.31 to
+109.59
DME status display
To Next Page
Loading...
Need help?
General