194
Overall Color Corrector Operations
Chapter 9 Color Corrector
Overall Color Corrector
Operations
Enabling Color Corrector
To enable the functions of color corrector 1, for example,
use the following procedure.
1
In the CCR menu, press VF1 ‘CCR1’ and any HF.
2
In the <CCR> group, press [CCR], turning it on.
Returning all color corrector settings to
their defaults
1
In the <CCR> group, press [Unity].
A confirmation message appears.
2
Press [Yes].
This returns all color corrector settings to their
defaults, whether [CCR] is on or off.
Copy and Swap Operations
Copying color corrector data
1
In the CCR menu, press VF5 ‘Copy/Swap.’
The Copy/Swap menu appears.
The status area shows a copy source list on the left and
a copy destination list on the right.
2
Using any of the following methods, select the copy
source data and copy destination data.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
3
Press [Copy].
This carries out the copy.
Swapping color corrector data
Refer to the procedure described in the previous item
“Copying color corrector data.” In step 3, press [Swap]
instead of [Copy].
To undo copy or swap
In the Copy/Swap menu, press [Undo].
The state before carrying out the copy or swap is restored.
Knob Parameter Adjustment Setting values
1 Left No Select copy
source data
1 or 2
2 Right No Select copy
destination
data
1 or 2
To Next Page
Loading...
Need help?
General