176
Image Data Management
Chapter 7 Frame Memory
Deleting Files
1
In the Frame Memory menu, select VF4 ‘File’ and
HF5 ‘Delete.’
The Delete menu appears. In the status area, whether
pair mode is on or off, all of the saved files appear as
thumbnails.
2
Select the folder which contains the file to be deleted.
3
Using either of the following methods, select the file to
be deleted. If necessary, press the arrow keys to scroll
the display.
• Press directly on the thumbnail in the status area.
• Turn the knobs.
• To delete all files, press [Select All], turning it on.
• When a clip thumbnail is selected, the still image
files making up the clip are also selected for
deletion.
4
If necessary, turn the knob to check the contents of the
frame memory clip through the thumbnail display.
5
Press [Delete].
A message for confirming the deletion appears.
6
To confirm the deletion press [Yes], and to cancel
press [No].
Renaming Files
1
In the Frame Memory menu, select VF4 ‘File’ and
HF6 ‘Rename’
The Rename menu appears. In the status area, whether
pair mode is on or off, all of the saved files appear as
thumbnails.
2
Using either of the following methods, select the file to
be renamed. If necessary, press the arrow keys to scroll
the display.
• Press directly on the thumbnail in the status area.
• Turn the knobs.
3
If necessary, turn the knob check the contents of the
frame memory clip through the thumbnail display.
4
Press [Rename].
A keyboard window appears.
5
Enter the new name, then press [Enter] in the keyboard
window.
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL, COM0,
COM1, COM2, COM3, COM4, COM5, COM6,
COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6,
LPT7, LPT8, LPT9
Knob Parameter Adjustment Setting values
1 No File selection 1 and upwards
2 Num Selection of
number of
files in
sequence
1 and upwards
Knob Parameter Adjustment Setting values
3 Viewer For a movie,
the current
frame
position. For
a still image,
no effect.
00:00:00 and
upwards
Knob Parameter Adjustment Setting values
1 No File selection 1 and upwards
Knob Parameter Adjustment Setting values
3 Viewer For a movie,
the current
frame
position. For
a still image,
no effect.
00:00:00 and
upwards
Notes
To Next Page
Loading...
Need help?
General