385
Keyframes
Chapter 13 Keyframe Effects
DME Effect menu
a) This cannot be used on the MVE-8000A.
DME Global Effect menu
Types of path
Path types for Curve
There are five types, as follows.
OFF: Executing the effect causes no change.
Step: There is no interpolation between keyframes,
so that the effect parameters are updated each time a
keyframe is passed.
Linear: Linear interpolation between keyframes,
resulting in constant speed movement.
S-Curve: The rate of change accelerates and
decelerates before and after a keyframe, so that the rate
of change is maximum midway between two
keyframes.
Spline: The effect follows a smooth curved path
from each keyframe to the next.
Path types for Hue
There are four types, as follows.
CW: The hue changes in a clockwise direction as
seen on a Vectorscope.
CCW: The hue changes in a counterclockwise
direction as seen on a Vectorscope.
Short: The hue changes in whichever of the
clockwise and counterclockwise directions is shorter.
Long: The hue changes in whichever of the
clockwise and counterclockwise directions is longer.
Path types for Xpt
There are two types, as follows.
Xpt Hold off: When replaying a keyframe, change
the inputs to the settings saved in memory.
Xpt Hold on: When replaying a keyframe, do not
change the inputs.
Effect Execution
By using the [RUN] button in the keyframe control block,
you can replay the effect as a continuous sequence of
images. This is referred to as effect execution.
Axis Loc Overall path settings for items
relating to image rotation axis are
made simultaneously.
Axis All
Axis X, Axis
Y, A x i s Z
Paths for the x-, y- and z-axes
Item Paths that can be set
Effect All Overall path settings for DME effect
items are made simultaneously.
Edge Overall path settings for edge items
are made simultaneously.
Edge All
Border Path for border
Crop/Edge
Soft
Path for crop/edge softness
Beveled Edge Path for beveled edge
Key Border Path for key border
a)
Art Edge Path for art edge
a)
Flex Shadow Path for flex shadow
a)
Wipe Crop Path for wipe crop
a)
Color Mix Path for color mix
a)
Video Modify Overall path settings for video
modify items are made
simultaneously.
Video Modify
All
Defocus/Blur Path for defocus/blur
Multi Move Path for “multi-move”
Color Modify Path for color modify
Mosaic Path for mosaic
Mask Path for mask
Sketch Path for sketch
Metal Path for metal
Dim/Fade Path for dim/fade
a)
Glow Path for glow
Freeze Path for freeze
Non-Linear Path for nonlinear effects
Corner Pin Path for corner pinning
Light Overall path settings for lighting
items are made simultaneously.
Light All
Lighting Path for lighting
Spot Lighting Path for spotlighting
a)
Trail Path for trails
In/Out Overall path settings for items
relating to input/output are made
simultaneously.
In/Out All
Bkgd Path for background
Video/Key Path for video/key
Item Paths that can be set
Item Paths that can be set
Global Effect All Overall path settings for DME global
effect items are made simultaneously.
Combine Path for combiner
Shadow Path for shadow
Brick Path for brick
To Next Page
Loading...
Need help?
General