580
Macro File Editing Rules
Appendix (Volume 2)
Correspondence Between Events and Symbols
For details of events, see “Events” (page 428).
Event Symbol Using Continue
Cross-point selection in the auxiliary bus control block AuxXpt No
Cross-point selection in the auxiliary bus control block in router control mode RouterXpt Yes
Cross-point selection in the cross-point control block MEXpt Yes
Auto transition and take in the transition execution section MEAutoTransition Yes
Cut in the transition execution section MECut No
Transition type selection TransitionType No
Next transition setting NextTransition No
Pattern limit on/off PatternLimit No
Fade-to-black execution FadeToBlack No
Auto transition and take in the independent key transition execution section KeyAutoTransition Yes
Key insertion and deletion in the independent key transition execution
section
KeyCut Yes
Independent key transition type selection KeyTransitionType No
VTR/DDR/clip start point setting StartTc Yes
VTR/DDR/clip playback Play Yes
VTR/DDR/clip stop Stop Yes
VTR/DDR/clip cue-up Cue Yes
VTR/DDR/clip fast forward FF Yes
VTR/DDR/clip rewind Rewind Yes
Disk recorder/Extended VTR file recall DiskFileLoad No
Recall snapshot Snapshot Yes
Recall key snapshot KeySnapshot Yes
Recall wipe snapshot WipeSnapshot Yes
Recall DME wipe snapshot DMEWipeSnapshot Yes
Recall shotbox Shotbox No
Recall master snapshot MasterSnapshot No
Recall master timeline MasterTimelineRecall No
Recall effect TimelineRecall Yes
Execute effect TimelineRun Yes
Rewind keyframe TimelineRewind Yes
Fast forward effect TimelineFF Yes
Effect execution direction selection (normal) TimelineDirectionNormal Yes
Effect execution direction selection (reverse) TimelineDirectionReverse Yes
Effect execution direction selection (normal/reverse on) TimelineNormalReverseOn Yes
Effect execution direction selection (normal/reverse off) TimelineNormalReverseOff Yes
Pause
a)
Pause No
Recall of function assigned to memory recall button/user preference button UtilityButton No
Recall of function assigned to the key 2 row cross-point buttons Key Bus Utility Button No
Frame memory clip loop on/off FMLoop Yes
Menu macro recall and execution MenuMacroRun No
Recall of frame memory clip ClipRecall No