300
Global Effect Operations
Chapter 11 DME Operations
Global Effect Operations
Overview
Global effects are special effects created by combining the
images of successive channels. The Global Effect menu is
used to add these effects. The following types of global
effects are available.
On the MVE-8000A, when the signal format is 1080P, of
the following effects, three or more channel combiner and
brick effects cannot be used.
Operations Common to All Global
Effects
In this section, explanations of the operating procedures
for individual global effects begin with selections from
VF1 ‘Ch1 - Ch4’ in the Global Effect menu. The following
are common operations that you must do prior to selecting
from this menu.
1
In the device control block, select the target DME
channel.
2
In the menu control block, press the top menu
selection button [GLB EFF], then select VF1 ‘Ch1 -
Ch4.’
Knob Parameter Adjustment Setting values
5 Zoom Degree of
zooming in on
the corners
1.00 to 16.00
Zoom Off
Zoom On
Notes
Name Effect/Image
Combiner Automatically combines the selected images
when multiple channels are selected on one
keyer or for one transition.
Brick Creates a rectangular parallelepiped from 3
successive channels.
Shadow Gives the image a shadow.
To Next Page
Loading...
Need help?
General