Honda PCX150 2014 User Manual

'.':",.:..!
MAINTENANCE
NUTS,BOLTS,FASTEN
RS
Check that
all
chassis nuts
and
bolts are tightened to
their correct torque values (page
1-11
).
Check that
all
cotter pins, safety clips, hose clamps and
cable stays are
in
place and properly secured.
WHEE
LS/Tl
RES
3-24
Support the scooter with its centerstand.
Making sure that the fork
is
not allowed
to
move, raise
the front wheel
and
check for play.
Check for worn front wheel bearings by grabbing the
front wheel
and
attempting
to
move the wheel side to
side.
Replace the front wheel bearings if any looseness
is
noted.
Turn the wheel and check that it rotates smoothly with
no
unusual noises.
If any abnormal conditions are suspected, inspect the
front wheel bearings (page 17-6).
Support the scooter securely
and
raise the rear wheel.
Check for worn final gear shaft bearings by grabbing
the rear wheel
and
attempting
to
move the wheel side
to
side.
Replace the final gear shaft bearings if any looseness is
noted.
Turn the wheel
and
check that it rotates smoothly with
no
unusual noises.
If any abnormal conditions are suspected, check the
final reduction (page 13-6).

Honda PCX150 2014 Specifications

General

Displacement	153cc
Bore x Stroke	58.0mm x 57.9mm
Compression Ratio	10.6:1
Fuel System	PGM-FI electronic fuel injection
Starter	Electric
Transmission	Automatic V-Matic belt drive
Rear Suspension	Twin shock
Rear Brake	Drum
Front Tire	90/90-14
Rear Tire	100/90-14
Wheelbase	51.8 inches
Front Suspension	31mm telescopic fork
Engine Type	Liquid-cooled 4-stroke single
Front Brake	Single 220mm disc with hydraulic two-piston caliper