PEM 1 Rev 01 740-001243 kj35756 DC
[...Output truncated...]
Meaning For all routers except the M160 and T320 routers and the T640 router, the command
output displays the power supply slot number, revision level, part number, serial number,
and the power supply type. When facing the back of the router, power supply A is located
on the right and power supply B is located on the left.
For the M160, T320, T640, and the T1600 router, the command output displays the
power supply or PEM slot number, revision level, part number, serial number, and power
supply type. When facing the back of the router, PEM 0 is located on the right and PEM
1 is located on the left.
Locate the Power Supply Serial Number ID Label
Purpose To locate the serial number ID on the power supply.
Action To locate the power supply serial number ID label, seeTable 87 on page 309 and Figure
141 on page 310 through Figure 152 on page 315.
Table 87: Power Supply Serial Number ID Label Locations on M Series
and T Series Routers
Serial Number ID Label Location
Power Supply
TypeRouter
Power supply faceplateAC, DCM5 and M10
Power supply faceplateAC, DCM7i and M10i
Right side of the power supply backAC, DCM20
Top of the power supplyAC, DCM40
Upper center of the power supply faceplateACM40e
Left center of the power supply faceplateDC
AC power supply faceplate under the cpower switchACM120
DC power supply faceplate under the circuit breaker switchDC
Left center of the power supply faceplateDCM160
On the power supply faceplate under the circuit breaker
switch
AC, DCM320
Left side of the power supply faceplateDCT320, T640,
T1600, TX
Matrix, and TX
Matrix Plus
309Copyright © 2012, Juniper Networks, Inc.
Chapter 10: Monitoring Power Supplies
To Next Page
Loading...
Need help?
General
