Sample Output
user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis 20079 M160
Midplane REV 03 710-001245 AB4132
FPM CMB REV 02 710-001642 AB3264
FPM Display REV 02 710-001647 AB3046
CIP REV 04 710-001593 AB3284
PEM 0 Rev 03 740-001243 KM28409 DC
PEM 1 Rev 03 740-001243 KM13359 DC
PCG 0 REV 02 710-001568 AB3013
PCG 1 REV 02 710-001568 AB3000
Meaning The command output displays the PCG slot number, revision level, part number, and
serial number.
Locate the PCG Serial Number ID Label
Purpose To locate the serial number ID on the PCG.
Action To locate the PCG serial number ID label, look on the top of the PCG, close to the midplane
connector. See Figure 254 on page 476.
Figure 254: PCG Serial Number ID Label
Related
Documentation
Checklist for Monitoring the PCG on page 465•
Replace the PCG
The PCGs are hot-pluggable. You can remove and replace them without powering down
the router, but the routing functions of the system are interrupted when the PCG is
removed.
If both PCGs are installed and functioning normally, PCG0 is the master PCG and PCG1
is the backup by default.
Copyright © 2012, Juniper Networks, Inc.476
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
Need help?
General
