Juniper M Series User Manual

configuring interfaces on the ASP–I, see the Junos OS Services Interfaces Configuration
Guide.
Figure 268 on page 521 shows the M10i router CFEB component.
Figure 268: M10i Router CFEB Component
You can install one CFEB in the M7i router from the rear of the router above the power
supplies. You can install one or two CFEBs from the rear of the M10i router chassis above
the fan tray (see Figure 269 on page 521).
Figure 269: M7i and M10i Router CFEB Location
Compact Forwarding Engine Boards
M7i rear M10i rear
FANTRAY O
FANTRAY 1
NOTE:
C-FEB 0
C-FEB 1
P/S 3
P/S 2
P/S 1
P/S 0
P/S 0 AND P/S 1 MUST BE PRESENT
FOR NORMAL OPERATION.
CFEB0
CFEB1
g002260
Related
Documentation
Checklist for Monitoring the CFEB on page 517•
Monitor the CFEB Status
To monitor the CFEB status:
1.
Display the CFEB Environmental Status on page 521
2.
Display the CFEB Detailed Status on page 522
3.
Check CFEB LEDs on page 522
Display the CFEB Environmental Status
Purpose To isolate problems in the CFEB by checking the environmental status.
Action To display the CFEB environmental status, use the following command:
521Copyright © 2012, Juniper Networks, Inc.
Chapter 24: Monitoring the CFEB

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English