CHAPTER 26
Monitoring the FIC
•
Checklist for Monitoring the FIC on page 543
•
Understanding the FIC on page 544
•
Monitor the FIC Status on page 546
•
Display FIC Alarms on page 547
•
Display FIC Hardware Information on page 548
Checklist for Monitoring the FIC
Purpose You monitor the Fixed Interface Card (FIC), which receives incoming packets from the
network and transmits outgoing packets to the network, providing support for Fast
Ethernet ports or Gigabit Ethernet interfaces, depending on which version of the FIC is
installed in the M7i router. You also monitor the FIC to view alarm status, and to perform
some system control functions, such as taking PICs online and offline. (See Table 132 on
page 543.)
Action Table 132: Checklist for Monitoring the FIC
Command or ActionMonitor FIC Tasks
“Monitor the FIC Status” on page 546
The FIC is located in FPC 1 slot 3.1. Understanding FIC Slot Numbering on
page 545
show chassis pic pic-slot 3 fpc-slot 12. Display FIC Status at the Command Line
on page 546
Look at the FIC faceplate LEDs.3. Check FIC LEDs on page 546
“Display FIC Alarms” on page 547
show chassis pic pic-slot 3 fpc-slot 11. Display the FIC Status on page 547
show log messages | match PIC 32. Display FIC Errors In the messages Log
File on page 547
show log chassisd | match PIC 3
Look at the FIC faceplate LEDs.
3. Display FIC Errors in the chassisd Log File
on page 548
543Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
