If the replaced SCG is online, the removed SCG has failed. Return the SCG as described
in “Return the Failed Component” on page 116.
Related
Documentation
Checklist for Monitoring the SCG on page 401•
Get SCG Hardware Information
To get the SCG hardware information:
1.
Display the SCG Hardware Information on page 410
2.
Locate the SCG Serial Number ID Label on page 410
Display the SCG Hardware Information
Purpose To obtain the SCG hardware information.
Action To display the SCG hardware information, use the following command:
user@host> show chassis hardware
Sample Output
user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis abcdef T320
Midplane REV 01 710-004339 AY4529
FPM GBUS REV 02 710-004461 AY4511
FPM Display REV 02 710-002897 HF6094
CIP REV 05 710-002895 HC0468
PEM 1 Rev 01 740-004359 2708013 Power Entry Module
SCG 0 REV 06 710-004455 AY4526
SCG 1 REV 06 710-004455 AY4523
Meaning The command output displays the SCG slot number, revision level, part number, and
serial number.
Locate the SCG Serial Number ID Label
Purpose To locate the serial number ID on the SCG.
Action The serial number is located on the top of the SCG, close to the midplane connector (see
Figure 224 on page 411).
Copyright © 2012, Juniper Networks, Inc.410
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
Need help?
General
