Juniper M Series User Manual

Related
Documentation
Checklist for Monitoring the SCB on page 491•
Obtain SCB Hardware Information
To obtain SCB hardware information:
1.
Display the SCB Hardware Information on page 500
2.
Locate the SCB Serial Number ID Label on page 500
3.
Display the SCB Firmware Version on page 501
Display the SCB Hardware Information
Purpose To obtain the SCB hardware information.
Action To display the SCB hardware information, use the following command:
user@host> show chassis hardware
Sample Output
user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis 00291 M40
Backplane REV 10 710-000073 AA2220
Power Supply A Rev A1 740-000234 000134 AC
Maxicab REV 07 710-000229 AA6957
Minicab REV 03 710-000482 AA3324
Display REV 07 710-000150 AA7798
Routing Engine RE-1.0
SCB REV 11 710-000075 AA7244 Internet Processor I
[...Output truncated...]
Meaning The command output displays the SCB version level, part number, serial number, and
description.
Locate the SCB Serial Number ID Label
Purpose To locate the serial number ID on the SCB.
Action To locate the SCB serial number ID label, look on the SCB board toward the front panel.
See Figure 261 on page 501.
Copyright © 2012, Juniper Networks, Inc.500
M Series and T Series Routers Monitoring and Troubleshooting Guide

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English