Related
Documentation
Checklist for Monitoring the PCG on page 465•
Display PCG Alarms
To display PCG alarms and error messages:
1.
Display Current PCG Alarms on page 472
2.
Display PCG Error Messages in the System Log File on page 472
3.
Display PCG Error Messages in the Chassis Daemon Log File on page 473
Display Current PCG Alarms
Purpose To determine the details of the current PCG alarms.
Action To display the current PCG alarms, use the following command:
user@host> show chassis alarms
Sample Output
user@host> show chassis alarms
2 alarms currently active
Alarm time Class Description
2002-06-11 20:30:29 PDT Minor PCG 0 Not Online
2002-06-11 20:30:32 PDT Minor No PCGs Online
Meaning The command output displays the alarm date, time, severity level, and description.
Display PCG Error Messages in the System Log File
Purpose To determine the details of the PCG error messages in the system log file.
Action To display the PCG error messages in the system log file, use the following CLI command:
user@host> show log messages
Sample Output
user@host> show log messages
Jun 11 20:31:31 myrouter chassisd[553]: CHASSISD_NO_GOOD_PCGS:
Meaning The messages system log file records the time the failure or event occurred, the severity
level, a code, and a message description. You can also use the show log messages | match
pcgs command to see error messages that are generated when a PCG fails or is offline.
Use this information to diagnose a problem and to let the Juniper Networks Technical
Assistance Center (JTAC) know what error messages were generated and the router
events that occurred before and after the problem. For more information about system
log messages, see the Junos OS System Log Messages Reference.
Copyright © 2012, Juniper Networks, Inc.472
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
Need help?
General
