Juniper M Series User Manual

CHAPTER 31
Monitoring Redundant Cooling System
Components
•
Checklist for Monitoring Redundant Cooling System Components on page 623
•
Understanding Redundant Cooling System Components on page 624
•
Display Redundant Cooling System Components on page 643
Checklist for Monitoring Redundant Cooling System Components
Purpose To monitor and maintain redundant cooling system components to keep an acceptable
operating temperature for the router chassis and its components. (See Table 142 on
page 623.)
Action Table 142: Checklist for Monitoring Redundant Cooling System Components
Command or Action
Monitor Redundant Cooling System Component
Tasks
show chassis environment
“Display Redundant Cooling System
Components” on page 643
See “Checking the Cooling System Status”
on page 339.
Check the Redundant Cooling System Status
See “Display the Current Router Alarms” on
page 67.
Check the Redundant Cooling System Alarms
See “Replacing a Cooling System
Component” on page 350.
Remove a Cooling System Component
See “Return the Failed Component” on
page 116, or follow the procedure in
appropriate router hardware guide.
Return RedundantCooling System Components
Related
Documentation
Redundant Cooling System Components Overview on page 624•
623Copyright © 2012, Juniper Networks, Inc.

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English