Juniper M Series User Manual

CHAPTER 12
Maintaining the Cable Management
System, Cables, and Connectors
•
Checklist for Maintaining Cables and Connectors on page 351
•
Understanding the Cable Management System, Cables, and Connectors on page 352
•
Maintaining the PIC Cables on page 359
•
Maintaining the PIC Fiber-Optic Cable on page 360
•
Cleaning the Transceivers on page 361
•
Checking the PIC Port Status on page 361
•
Maintaining the Power Cables on page 363
•
Maintaining Routing Engine External Cables on page 364
•
Replacing the Cable Management System on page 364
Checklist for Maintaining Cables and Connectors
Purpose You maintain the router cables in the cable management system to ensure that fiber-optic
cables have the proper bend radius and to ensure that all cables are organized and
securely in place.
You maintain the PIC cables and connectors to ensure that they transport incoming
packets from the network and transmit outgoing packets to the network.
You maintain the power cables and connectors to ensure that power is supplied to the
router.
You maintain the Routing Engine external cables and connectors to ensure that you can
connect external devices to the router. (See Table 92 on page 351.)
Action Table 92: Checklist for Maintaining Cables and Connectors
Command or ActionMaintain Cable and Connector Tasks
Use only specified cables and connectors.
“Maintaining the PIC Cables” on page 359
Follow all guidelines to ensure that fiber-optic
cables transmit packets to and from the
network.
“Maintaining the PIC Fiber-Optic Cable”
on page 360
351Copyright © 2012, Juniper Networks, Inc.

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English