and CB0; the backup host module has components installed in slots RE1 and CB1. The
Routing Engines are hot-pluggable.
The M320 router craft interface LEDs indicate the Routing Engine operating status and
mastership. (See “Check the M320 Router Routing Engine LEDs” on page 186.)
Figure 296: M320 Router Redundant Routing Engines
Related
Documentation
Checklist for Monitoring Redundant Routing Engines on page 591•
T320 Router, T640 Router, and T1600 Router Routing Engine Redundancy
Figure 297 on page 597 shows the T320 router, T640, and T1600 redundant Routing
Engines that are components of the host subsystem.
Copyright © 2012, Juniper Networks, Inc.596
M Series and T Series Routers Monitoring and Troubleshooting Guide