Juniper M Series User Manual

Figure 20: Rear View of a TX Matrix Plus Router
PEM 1
g004501
Fan tray 4
Fan tray 2
Fan tray 3
PEM 1
PEM 0
Fan tray 5
Grounding
points
ESD point
ESD point
Air exhaust
Air exhaust
Air exhaust
TXP-F13
SIBs
TXP-F13
SIBs
Related
Documentation
TX Matrix Plus Router Major Hardware Components on page 45•
TX Matrix Plus Router Major Hardware Components
Table 16 on page 45 lists the major TX Matrix Plus router components and characteristics.
Table 16: TX Matrix Plus Router Major Hardware Components
Offline
Button
Field-
ReplaceableRedundantFunctionQuantityComponent
YesHot-pluggableYesProvides ports for external
management and alarm relay devices.
2Connector Interface
Panel (CIP)
45Copyright © 2012, Juniper Networks, Inc.
Chapter 2: T Series Core Routers

Juniper M Series Specifications

General

Product Series	M Series
Type	Network Router
Manufacturer	Juniper Networks
Throughput	Varies by model
Operating System	JUNOS
Switching capacity	Varies by model
Supported Interfaces	ATM
Routing Capacity	Varies by model
Forwarding Performance	Varies by model
Maximum Number of Interfaces	Varies by model
Power Supply	Redundant power supplies available
Line rate	Varies by interface type
Key Features	Advanced routing protocols
Redundancy	Redundant power supplies
Dimensions	Varies by model
Weight	Varies by model
Memory	Varies by model
Storage	Varies by model
Environmental Conditions	Operating temperature: Typically 0°C to 40°C, Humidity: 10% to 90% non-condensing