Related
Documentation
Checklist for Monitoring Redundant HCMs on page 735•
Display HCM Alarms
Purpose To determine the details of the HCM alarms.
If a single HCM installed in a routing platform fails, no alarm can be sent. However, if it
is a dual system, the following alarm is displayed when the backup Routing Engine takes
over.
Action To view an HCM alarm when the backup Routing Engine takes over, use the following
command:
user@host>show chassis alarms
Sample Output
user@host>show chassis alarms
1 alarm currently active
Alarm time Class Description
2005-02-16 22:10:27 UTC Minor Backup RE Active
Related
Documentation
Checklist for Monitoring Redundant HCMs on page 735•
Verify HCM Failure
Purpose To verify HCM failure by checking the current HCM status.
Action To view current HCM status when the backup Routing Engine takes over, use the following
command.
user@host>show chassis routing-engine
Sample Output
user@host>show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Backup
Election priority Master (default)
Temperature 33 degrees C / 91 degrees F
DRAM 2048 MB
Memory utilization 13 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
Model RE-3.0
Serial ID P10865703096
Start time 2005-02-16 22:13:19 UTC
Uptime 2 hours, 13 minutes, 57 seconds
Routing Engine status:
Slot 1:
Copyright © 2012, Juniper Networks, Inc.740
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
Need help?
General
