Suzuki kq750 User Manual

Starting System: 1I-18
Specifications
Service Data
B831G21907001
Unit: mm (in)
Tightening Torque Specifications
B831G21907002
NOTE
The specified tightening torque is also described in the following.
“Starter Motor Components (Page 1I-3)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B831G21908001
NOTE
Required service material is also described in the following.
“Starter Motor Components (Page 1I-3)”
“Recoil Starter Components (Page 1I-14)”
Item Specification Note
Starter motor brush length
Standard 12.5 (0.49)
Limit 6.0 (0.24)
Starter torque limiter slip torque Standard
41.2 – 62.8 N⋅m
(4.2 – 6.4 kgf-m, 14.5 – 32.5 lb-ft)
Starter relay resistance 3 – 5 Ω
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Starter motor mounting bolt 10 1.0 7.0 )(Page 1I-4)
Starter motor lead wire mounting nut 6 0.6 4.5 )(Page 1I-4)
Starter clutch bolt 26 2.6 19.0 )(Page 1I-11)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 1I-4) / )(Page 1I-5)
/ )(Page 1I-16) /
)(Page 1I-16)
Moly paste SUZUKI Moly paste or equivalent P/No.: 99000–25140 )(Page 1I-5)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 1I-11)
THREAD LOCK CEMENT 1342 or
equivalent
P/No.: 99000–32050 )(Page 1I-14)

Suzuki kq750 Specifications

General

Brand	Suzuki
Model	kq750
Category	Offroad Vehicle
Language	English