Toshiba e-STUDIO556 User Manual

6
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ADJUSTMENT
6 - 33
6.5.3 Gamma balance adjustment
The density is adjusted by adjusting the gamma balance. The adjustment is performed by selecting its
density area from the following: low density, medium density and high density.
< Adjustment Mode (05) >
Note:
Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes to be adjusted (language and screen) and press the [START] button.
(3) Key in the value corresponding to the density area to be adjusted (0, 1 or 2) and press the
[START] button.
0: Low density (L) 1: Medium density (M) 2: High density (H)
(4) Key in the adjustment value. (To correct the value once keyed in, press [C] button.)
(5) Press the [OK] or [INTERRUPT] button to store the value in memory. ¨ The equipment goes back
to the ready state.
(6) For resetting the value, repeat step (2) to (5).
(7) Let the equipment restart and perform printing job.
(8) If the image density has not been attained, repeat step (2) to (7).
Color
mode
Smooth
(PS)
Detail
(PS)
Smooth
(PCL)
Detail
(PCL)
Smooth
(XPS)
Detail
(XPS)
Item to
be
adjusted
Remarks
Black
(600 dpi)
7315-0 7316-0 7317-0 7318-0 7319-0 7320-0 Low
density
The larger the
value is, the density
of the item to be
adjusted becomes
darker.
Acceptable values:
0 to 255. (Default:
128)
7315-1 7316-1 7317-1 7318-1 7319-1 7320-1 Medium
density
7315-2 7316-2 7317-2 7318-2 7319-2 7320-2 High
density
Color
mode
Auto (PS)
Item to
be
adjusted
Remarks
Text
Graphic
s
Image
Black
(600 dpi)
7360-0 7361-0 7362-0 Low
density
The larger the value is, the density of the item to be
adjusted becomes darker.
Acceptable values:
0 to 255. (Default: 128)
7360-1 7361-1 7362-1 Medium
density
7360-2 7361-2 7362-2 High
density
Color
mode
Auto (XPS)
Item to
be
adjusted
Remarks
Text
Graphic
s
Image
Black
(600 dpi)
7366-0 7367-0 7368-0 Low
density
The larger the value is, the density of the item to be
adjusted becomes darker.
Acceptable values:
0 to 255. (Default: 128)
7366-1 7367-1 7368-1 Medium
density
7366-2 7367-2 7368-2 High
density

Toshiba e-STUDIO556 Specifications

General

Brand	Toshiba
Model	e-STUDIO556
Category	All in One Printer
Language	English