e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
REMOTE SERVICE
10 - 22
• Time setting ([CHANGE] button)
Pressing the [CHANGE] button sets the time at which you wand to send data.
This is the time when data are sent with “Day of the week”, “Notify Date 1” and “Notify Date 2”.
Fig. 10-26
Key in the time (acceptable values: 00:00-23:59) in “Time”.
Key in the time in the hour column of “Time”, press the scroll button, key in the time in the minute
column of “Time”.
After all the settings are completed, press the [OK] button. The display returns to the screen in
step (5).
(7) Press the [OK] button. The setting completes.
Service Notification setting is also available from the following setting mode (08).
Items 08 code Contents
Service Notification setting 9793 0: OFF (Invalid) 1:E-mail 2:FAX
E-mail address 1 9794 Maximum 192 letters
E-mail address 2 9607 Maximum 192 letters
E-mail address 3 9608 Maximum 192 letters
FAX number 9784 Maximum 32 digits
Total Counter Transmit setting 9795 0: OFF (Invalid) 1: ON (Valid)
Total counter transmission date setting 9796 0 to 31
Total counter transmission date setting(2) 9880 0 to 31
Day of total counter data transmission 9881 1 byte
00000000(0)-01111111(127)
From the 2nd bit - Sunday, Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday
Total counter transmission interval setting
(Hour/Hour/Minute/Minute)
9606 00:00-23:59
Service Call Transmit setting 9605 0: OFF (Invalid) 1: ON (Valid)
PM Counter Transmit setting 9797 0: OFF (Invalid) 1: ON (Valid)
To Next Page
Loading...
Need help?
General
