Other Options
SM 15 D381
Printer/
Scanner
Option
D381
1.3.2 POSTSCRIPT 3
Unplug the main machine power cord before you do the following procedure.
1. Remove the slot cover [1] ( x 1).
2. Turn the SD-card label face [2] to the rear of the machine. Then push it slowly into slot
1 until you hear a click.
3. Attach the slot cover [1] ( x 1).
4. Attach the “Adobe PostScript 3” decal [3] to the front door.
5. Make sure that the machine can recognize the option ( "Check All Connections" at
the end of this section).