Energy Save
SM 7-1 D009/D011/D012/D013/D091/D092
Energy
Saving
7. ENERGY SAVING
7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the
environment.
The area shaded grey in this diagram represents the amount of energy that is saved when
the timers are at the default settings. If the timers are changed, then the energy saved will
be different. For example, if the timers are all set to 240 min., the grey area will disappear,
and no energy is saved before 240 min. expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
 Panel off timer (10 sec – 240 min): Panel Off Mode. Default setting: 1minute
 Auto off timer (1 – 240 min): Off/Sleep Mode
Default settings: 1 minute
Normally, Panel Off timer < Auto Off timer. But, for example, if Auto Off timer < or = Panel
Off timer, the machine goes immediately to Off mode when the Auto Off timer expires. It
skips the Panel Off.
To Next Page
Loading...
Need help?
General
