Energy Save
D009/D011/D012/D013/D091/D092 7-2 SM
Example
 Panel off: 1 min.
 Auto Off: 1 min.
 The machine goes to Off mode after 1 minute. Panel Off and Low Power modes are
not used.
Return to Stand-by Mode
Off/Sleep Mode
Recovery time.
 Max 10 sec. for D009/D011/D091
 Max 15 sec. for D012/D013/D092
Recommendation
We recommend that the default settings should be kept.
 If the customer requests that these settings should be changed, please explain that
their energy costs could increase, and that they should consider the effects on the
environment of extra energy use.
 If it is necessary to change the settings, please try to make sure that the Auto Off timer
is not too long. Try with a shorter setting first, such as 30 min., then go to a longer one
(such as 60 min.) if the customer is not satisfied.
 If the timers are all set to the maximum value, the machine will not begin saving energy
until 240 minutes has expired after the last job. This means that after the customer has
finished using the machine for the day, energy will be consumed that could otherwise
be saved.
 If you change the settings, the energy consumed can be measured using SP8941, as
explained below.
To Next Page
Loading...
Need help?
General
