190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 30-7
30.4.4 System Options Page
The System Options Page is used to display the selections of System Type and Advanced User Setup
options.
System Type - Selections are Non-Certified or Certified. Set to Non-Certified when not installed under
STC.
Advanced User Setup - Selections are Enabled or Disabled. When enabled, the Autopilot setup and AOA
calibration setup are available in normal mode. This option must be enabled for initial flight testing to
setup the autopilot and AOA.
To Next Page
Loading...
