190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 30-246
30.8.1 External IFR Navigator Crossfill Configuration
30.8.1.1 GPS 175, GNX 375, and GTN 6XX/7XX (v6.62 and newer only)
Two configuration changes are required to enable the crossfill function. In normal mode, External FPL
Crossfill must be enabled on the System Setup page. In configuration mode, External FPL must be enabled
on the Main System configuration page.
See Section 30.7.2
(GNX 375), Section 30.7.3, (GPS 175), or Section 30.7.5 (GTN 6XX/7XX) for
instructions on entering configuration mode.
External FPL Crossfill Enabled (Normal Mode)
External FPL Enabled (Configuration Mode)
30.9 Checklist Editor
The Aviation Checklist Editor (ACE) is available for free download from the Garmin website
www.garmin.com
. Click on the Software link on the G3X product page and follow the on-screen
instructions to download the checklist editor software.
NOTE
The checklist file should be named with a ‘.ace’ file extension, and placed in the root
directory of the SD card. Only one checklist file should be placed on the SD card.
To Next Page
Loading...
Need help?
General
