COPYRIGHT
©
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 4 IMAGE FORMATION SYSTEM
4-77 P
8) Remove the two mounting screws [13],
and detach the blade [14] together with
its mounting plate.
F04-709-10
9) Remove the bearing [15] at the front
and the rear, and detach the developing
cylinder [16].
F04-709-11
Do not leave fingerprints or oils
on the surface of the developing
cylinder. Otherwise, dry wipe it
with lint-free paper. (Do not use
solvent.)
7.9.5 Cleaning the Developing Anti-Stray Sheet
1) Remove the developing assembly, and
clean the developing anti-stray sheet
[1].
F04-709-12
[13] [14] [13]
[15]
[16]
[15]
[1]
Download Free Service Manual at http://printer1.blogspot.com
To Next Page
Loading...
Need help?
General
