EXTERNAL SECTION
3-A-2
3 DIS./ASSEMBLY
[2] Replacing the Developing Suction
Filter
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Caution: When replacing the developing suc-
tion filter, insert it in the opening in the
main body as far as it will go.
a. Procedure
(1) Loosen the screw to remove the developing suc-
tion filter cover.
(2) Replace the developing suction filter.
(3) Reinstall the above parts following the removal
steps in reverse.
Caution: When installing the developing suc-
tion filter, the filter-supporting material
should face the back of the machine.
Developing suction filter cover
Developing suction filter
Screw
MODEL MANUAL REVISED EDITION DATE PAGE METHOD
SERVICE MANUAL Dec. 2003
7155/7165/7255/7272
3-A-1-1 ADDITION
4
To Next Page
Loading...
Need help?
General
