36 MODE
1 ADJUSTMENT
machine in a dark location and facing a direc-
tion such that external light does not get into it,
then carry out the installation survey once
again.
<Error message2>
A datum with potentioal not to function non-
image-area-erase is found.
Please confirm "adjustment" - "36 mode" col-
ums of the Service Hand book.
<Countermeasure2>
If you use the non-original erasure function rel-
atively infrequently, you can use the machine
in its present installation environment.
If, however, you copy originals that have a dark
background fairly frequently, re-install the
machine in a dark location and facing a direc-
tion such that external light does not get into it,
then carry out the installation survey once
again. In this case, if there is a bright light
source, such as a fluorescent light, directly
above the machine, reconsider the installation
location and direction, or take steps to block off
the light from the light source (by using a cover,
for example), then carry out the installation
survey once again.
[15] Recall standard data (Image adjust-
ment)
Restoring image adjustment settings to standard val-
ues (factory setting data).
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Image adjustment".
3
[Image adjustment mode menu
Screen]
Select " Recall standard data".
4
[Recall standard data Screen]
Press the key.
Various data is restored to standard val-
ues.
5
Press the key to return to
the Image adjustment mode menu
Screen.
2
8
YES
RETURN
1-70
To Next Page
Loading...
Need help?
General
