Konica Minolta 7155 User Manual

36 MODE
1 ADJUSTMENT
[16] Running Test Mode
Testing continuous copy operation.
Select “ Running test mode” in the Adjustment
mode menu Screen.
This adjustment consists of the following items:
Intermittent copy mode
In this mode, the machine goes into the copy
ready state after completing a set number of
copy operations, waits 0.5 sec, and then repeats
the same operation.
Paperless running mode
In this mode, the machine goes into the copy
ready state after completing a set number of
copy operations without performing paper detec-
tion or jam detection, waits 0.5 sec, and then
repeats the same operation.
Paperless mode
In this mode, the machine makes a set number
of copies at approximately the same timing as for
normal copy without performing paper detection
or jam detection.
Paperless endless mode
In this mode, the machine makes copies at
approximately the same timing as for normal
copy without performing paper detection or jam
detection. The copy quantity is set to infinity
automatically.
Running mode
This mode consists of Paperless mode with
repetitive scanner scan and auto paper feed tray
change.
[17] Test pattern output mode
Output test pattern.
Select “ Test pattern output mode” in the Adjust-
ment mode menu Screen to display the Test pattern
output mode screen.
Caution: Do not touch any mode that is not spe-
cifically described.
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Running test mode".
3
[Running test mode menu Screen]
Press mode keys to .
4
[Copy Screen]
Press the START button.
5
Check the copy operation and then
press the STOP button to stop.
6
Turn the SW2 (sub power) OFF.
3
1
2
3
4
5
3
1 5
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Test pattern output mode".
3
[Test pattern output mode Screen]
Use the numeric keys to enter the num-
ber of the test pattern to output and press
the key.
4
Press the key.
5
[Copy Screen]
Select 11x17 size paper and press the
START button to output the test pattern.
6
To output another test pattern, press the
C button while pressing the P button and
repeat steps 3 to 5.
7
Press the key to end.
4
4
SET
COPY SCREEN
RETURN
1-71

Konica Minolta 7155 Specifications

General

Brand	Konica Minolta
Model	7155
Category	All in One Printer
Language	English