Internet ISW
2 ISW
INTERNET ISW
[1] What is the Internet ISW?
The Internet ISW is the system to perform ISW, by indicating ISW using the Internet mail (E-mail) or browser
to let copier automatically acquire the subject program from program server and rewrite its own program.
With this Internet ISW, you can update copier’s programs just by transmitting E-mail with simple keyword
described, without visiting customer’s office. With the Web function, you can perform the ISW on customer
site, without carrying the actual programs with you.
[2] Operating environment
• To use the Internet ISW function, the following conditions must be satisfied.
• The copier is connected to a network where programs can be downloaded from the Internet using ftp or
http protocol. *1
• The Internet ISW does not function in copier under the following conditions.
The main power is OFF.
The sub power is OFF.
The copier is shut OFF.
Note1: The Internet ISW does not function even of the copier receives the Internet ISW designating mail,
as long as it is in any of the above conditions. The Internet ISW starts if the above conditions are
released. However, the mails have period of validity.
Note2: The Internet ISW continues to function even if a paper jam or SC occurs, or in the low power mode.
[3] Main features
With the Internet ISW, the following functions are available.
1. Internet ISW using E-Mail remote notification system
*2
By sending simple keywords to a copier by E-Mail, the programs in the copier are rewritten automatically.
The boards of which programs can be rewritten with the Internet ISW are as follows. *3
Image control board (I)
Print control board (C)
FNS board (N)
(Video I/F board (V))
2. Internet ISW using Web utility
By accessing copier main body’s homepage via PC web browser, programs in the copier are rewritten auto-
matically. To use the function, a Web terminal that is networked to the copier is necessary. *4
*1: Programs can be downloaded using Firewall.
*2: To use the function, the E-Mail remote notification system must be setup separately.
*3: The available boards are different depending on the copier models.
*4: In case it is connected to a LAN, it can only be used within the LAN.
MODEL MANUAL REVISED EDITION DATE PAGE METHOD
SERVICE MANUAL Dec. 2003
7155/7165/7255/7272
2-8 ADDITION
4
4
To Next Page
Loading...
Need help?
General
