Konica Minolta 7155 User Manual

25 MODE
MODEL MANUAL REVISED EDITION DATE PAGE METHOD
SERVICE HANDBOOK May 20027155/7165
1 ADJUSTMENT
[12] Setting the Serial Number
This function allows you to display, set, or change the
serial number of the main body or option.
Serial number data can also be read from KRDS.
Reference1: If the set serial number is invalid, a
pop-up window appears to display
a warning message. Press the
key to close the pop-up
window, then enter a valid serial
number again.
Reference2: The entered characters will be
shifted to the left one after another,
starting at the right end.
[13] Displaying the ROM Version
This function allows you to display the versions of the
installed ROMs.
Step Operation
1
Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select the " Serial number setting".
3
[Serial number setting mode Screen]
Press the key you want to change
among the , ,
or key.
4
Enter the serial number using alphabetic
and numeric keys.
5
Perform steps 3 and 4 repeatedly to set
other serial numbers.
6
Press the key to allow the serial
numbers to take effect.
To cancel the serial numbers, press the
key. Pressing either key
will display the Memory setting mode
menu Screen again.
8
Main body
Option tray
Finisher
OK
CANCEL
OK
Step Operation
1
Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select the " Indication of ROM ver-
sion".
3
[Indication of ROM Version Screen]
The versions of the ROMs installed in
the image control (I1 to I5), printer con-
trol (C1 to C5), finisher (N), and Punch
(H) are displayed.
4
Press the key to return to the
Memory setting mode menu Screen.
9
RETURN
REPLACEMENT
1-46

Konica Minolta 7155 Specifications

General

Brand	Konica Minolta
Model	7155
Category	All in One Printer
Language	English