36 MODE
1 ADJUSTMENT
[5] Drum Peculiarity Adjustment
(Manual)
1. Maxiumum density manual adjustment
This adjustment must be performed under the
guidance of the authorized distributor.
Variable range: 0 to 41
2. Dot diameter manual adjustment
This adjustment must be performed under the
guidance of the authorized distributor.
Variable range: 0 to 255
[6] User Paper Setting
This adjustment is only performed when the user uses
special copy paper and can not be adjusted using the
standard adjustment process.
This setting is applied when "User" is selected for
"Paper type/Special size setting" in the key operator
mode or when "User paper" is selected for "Transfer/
separation output for plain paper" or "recycled paper"
in 25 mode DIPSW.
The data for 16 lb. plain paper" is input as the default.
4
4
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Process adjustment".
3
[Process adjustment mode menu
Screen]
Select " User paper setting".
4
Transfer/separation output screen
appears.
Enter data according to the user speci-
fied paper. Data should be input under
the guidance of the authorized distribu-
tor.
1
4
1-55
MODEL MANUAL REVISED EDITION DATE PAGE METHOD
SERVICE MANUAL Dec. 2003
7155/7165/7255/7272
1-55 REPLACEMENT
4
To Next Page
Loading...
Need help?
General
