Konica Minolta 7155 User Manual

PAPER FEED UNITS OF TRAYS 1 AND 2 (7155/7165)
3-J-4
3 DIS./ASSEMBLY
[6] Replacing the Wires
Caution1: After replacing or reinstalling the wires, manually rotate the up/down drive shaft to check that the
tray moves up and down smoothly.
Caution2: Be sure to install the wires so that they do not cross or ride over each other.
Removing Wires
(1) Remove the paper feed unit.
(2) Remove three screws to remove the wire cover(front) and wire cover (rear).
Wire cover (rear)
Wire cover (front)
Screws (6)

Konica Minolta 7155 Specifications

General

Brand	Konica Minolta
Model	7155
Category	All in One Printer
Language	English