7.10 User views
Use
In the "User Views" window you can create and adapt all machine data relevant to a particular
functionality. Machine data is individually collated to simplify the user's task.
You can include additional comments when creating and/or editing user views.
Note
Importing user views (compatibility)
If you have already created user views in HMI-Advanced, copy the *.klb files to /user/sinumerik/
hmi/template/user_views to use them in SINUMERIK Operate.
Display in the the "Parameter" operating area
Proceed as follows to show user views also in the "Parameters" operating area:
1. Select the "Start-up" operating area.
2. Press the "Machine data" softkey.
3. Press the "User views" softkey.
4. Press the "Manage view” softkey.
5. Press the "New view" softkey.
6. Activate the checkbox "Display parameter / use setting data", if you also wish to display the
new user view in the "Parameter" → "Setting data" → "Data lists".
7. Enter a name for the user view.
8. Confirm with "OK".
Machine and setting data
7.10 User views
SINUMERIK Operate (IM9)
110 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
