Machine information
Entries Meaning
Machine No. The unique machine number (serial number of the CompactFlash card) is dis‐
played in the header. This number serves as information only and cannot be
changed.
Machine name The manufacturer assigns a unique machine number in this field which is stored
in machine data MD17400 $MN_OEM_GLOBAL_INFO.
Note: The machine name is a mandatory field. No data can be stored until this
field is completed.
Machine type Machine type.
Address information
Under Addresses you can enter the following data for the manufacturer/manufacturer's
regional office, dealer and end customer:
● Customer number
● Manufacturer name and, if required, Branch name / Dealer name / End user name
● Street, Postal code/ZIP code, Location, Country (can be selected from a selection list),
Region/State
● Address of contact: Name, Phone, Fax, E-mail, URL
18.5.1 Entering machine-specific information
Preconditions
You must have the following access rights to be able to enter or change machine-specific
information.
Access level 1 (manufacturer)
Access level 2 (service)
Access level 3 (user)
Service and diagnostics
18.5 Machine identity
SINUMERIK Operate (IM9)
428 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
