23.5 Using interactive or silent installation versions
General Information
If you install SINUMERIK Operate using PC/PCU, then the execution is realized using an MSI
setup. The following installation versions are available, which you can use in the interactive or
silent mode using the appropriate Windows command line:
● SINUMERIK Operate complete installation
● SINUMERIK Operate base installation with auxiliary files
● SINUMERIK Operate base installation without auxiliary files
Execution
You control setup execution using command line arguments. The interactive mode /v allows
you to transfer parameter strings to setup.exe. If you wish to run setup without user interaction,
then you can extend the parameter string with the silent mode /qn.
Place the parameter string in inverted commas. If you use several parameters in the string,
separate these using spaces.
If you do not specify any arguments when calling setup.exe, then the complete installation is
run in the interactive mode.
Note
Do not put any spaces between /v and the parameter string.
Note
If you want a progress display in the silent mode, then instead of specifying /qn you can also
specify /qb!.
Interactive installation versions
setup.exe
Complete installation in the interactive mode
setup.exe /v"BASEONLY=1"
Base installation in the interactive mode with help
files
setup.exe /v"BASEONLY=1 HELPFILES=0"
Base installation in the interactive mode without
help files
SINUMERIK Operate on PC/PCU
23.5 Using interactive or silent installation versions
SINUMERIK Operate (IM9)
678 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
