Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Commissioning the system
1.2 User administration
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
11
1.2
User administration
1.2.1
Which users are set up?
Preset users
Each user is from one user type and belongs to one user group. The user types are
implemented under Windows in user groups with various user rights.
Upon delivery of the system, the following users are defined at the factory:
●
The "operator"
In terms of type, the "operator" is classed as an HMI user and belongs to the operators'
user group (operator.group). These operators have limited user rights under Windows.
●
The "user"
In terms of type, the "user" is classed as an HMI user and belongs to the operators' user
group (user.group). These operators have extended user rights under Windows.
●
The "auduser".
The "auduser" is an HMI service user type of user and belongs to the system
administrators' user group. The system administrators have the user rights of a local
administrator under Windows.
User name
Password
User type
Windows user
group
User Rights
User group
operator
operator
HMI (operator.group)
operator.group
Restricted
Operator
user
CUSTOMER
HMI (user.group)
user.group
"Power User"
Operator
auduser SUNRISE HMI+Service Administrators local
administrator
System administrators
siemens
*****
---
---
---
System administrators

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English