Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

5.5 File transfer
5.5.1 Overview
The SINUMERIK OPC UA server offers two methods to copy NC Part programs from OPC
UA Client to the SINUMERIK server and vice versa.
5.5.2 File structure
Accessing the file system
The OPC UA server allows the OPC UA client to support the transfer of files between the client
and the server.
As a user, you will require user access rights to access these files from the server. The access
rights are provided using the "GiveUserAcces" method. The following access rights can be
provided for the file system (also see chapter List of rights (Page 34)):
● FSRead for the method CopyFileFromServer
● FSWrite for the method CopyFileToServer
Functionality
5.5 File transfer
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1 53

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English