VSK7 Positions OEM Plunge turn‐
ing residual
material
OEM OEM Spigot res.
mat.
-- OEM
VSK8 Repeat posi‐
tion.
-- >> << Contour
milling
<< >> <<
ShopTurn start softkeys:
Drilling Turning Contour turning Milling Miscellaneous
HSK2 HSK3 HSK4 HSK5 HSK6 HSK10
VSK1 Drilling
centered
Stock re‐
moval
New contour -- Face mill‐
ing
New con‐
tour
Settings High
speed set‐
tings
Tool
VSK2 Centering Groove Stock removal -- Pocket Path Swivel
plane
Parallel
axes
Straight line
VSK3 Drilling
reaming
Undercut Stock remov‐
al residual
material
-- Multi-edge
spigot
Predrilling Swivel tool Repeat
progr.
Circle center
point
VSK4 Deep-
hole drill‐
ing
Thread Grooving -- Groove Pocket Counter‐
spindle
-- Circle radius
VSK5 Thread Parting Grooving re‐
sidual materi‐
al
-- Thread mill‐
ing
Pocket
res. mat.
Transfor‐
mations
-- Polar
VSK6 OEM -- Plunge-turn‐
ing
-- Engraving Spigot Subpro‐
gram
-- Approach/re‐
tract
VSK7 Positions OEM Plunge turn‐
ing residual
material
OEM OEM Spigot
res. mat.
-- OEM --
VSK8 Repeat
position.
-- >> << Contour
milling
<< >> << --
See also
Defining the start softkey (Page 33)
A.1.2 List of start softkeys for milling
Program operating area when milling
HSK1 HSK2 HSK3 HSK4 HSK5 HSK6 HSK7 HSK8
Edit Drilling Milling Contour mill‐
ing
Turning
(only for G
code)
Miscellane‐
ous
Simulation NC select
Reference lists
A.1 Lists of start softkeys
SINUMERIK Integrate Run MyScreens (BE2)
290 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
