2.5 Description of the actions
2.5.1 Help
Description
Syntax: sc help [Action]
Alternative names: -h, - -help
Authorization level: None
Calling "sc help" without any additional action outputs a list of all possible actions with a brief
description. If you enter an additional action, you receive a more detailed description for this
action.
Examples:
sc help
All actions:
help [ACTION]
Print help about a specific or list all actions
restart
Reboot the machine
enable hmi|nck|SUBSYSTEM...
enable DHCPSvr -INTERFACE
Enable HMI, NCK, or any other subsystem
[...]
sc help enable
enable hmi|nck|SUBSYSTEM...
DHCPSvr -INTERFACE
Enable subsystem(s), like 'hmi', 'nck', and so on. A subsystem name
is the name of the CFS containing it, without the '.cfs' extension.
This enables all CFSes with that name, but you can also use a full
path (e.g., /siemens/sinumerik/nck) to enable just a specific CFS.
Another form is to enable the DHCP server on a network interface,
for example 'enable DHCPSvr -X120'.
Configuring the system
2.5 Description of the actions
NCU operating system
42 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
