The following settings can be made:
Entries Meaning
Enabled true - Tool from/in file is offered.
false - Tool from/in file is not offered.
UnloadWithDelete true - The tool is deleted when unloaded to a file. The "In File" function
is not offered for "Delete tool."
false - Default setting, on Unload to file the tool is only unloaded and is
kept in the NC memory.
CreateNewToolWithDialog true - Default setting, before the tool is created from a file, the tool data
is displayed in the "New Tool" window.
false - The tool is created directly in the tool list.
ForceSisterToolNumber true - The sister tool number specified by the code carrier data is kept
when the tool is created.
false - Default setting, the sister tool number is freely assigned.
UseDefaultData true - The new tool is initialized with the configured default data before
the data are taken over from the file (see tag <NEWTOOLDEFAULTVA‐
LUECONFIGURATION> Section "Configuring default values for new
tools (Page 204)").
false - Default setting, the new tool is not initialized with the configured
default data.
12.3 Creating OEM texts
Overview
This section describes how you create OEM texts in a particular language.
The texts are created in the "sltmlistdialog_xxx.ts" file.
A dedicated file must be created for each language. The file names differ by the language code
(Supported languages (Page 656)). For "xxx", set the appropriate language code.
Tool management
12.3 Creating OEM texts
SINUMERIK Operate (IM9)
228 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
