mytext_<lng>.ts
<TS>
<context>
<name>mycontext</name>
<message>
<source>MY_AREA</source>
<translation>Text, which is displayed on the softkey</translation>
<remark>comment (optional)</remark>
<chars>20</chars>
<lines>2</lines>
</message>
</context>
</TS>
<lng> stands for the language code.
23.2 Parameterizing the OEMFrame application
File "oemframe.ini"
Using the "oemframe.ini" file, it is possible to further parameterize OEMFrame applications.
Create the file in the following directory:
<Installation path>/compat/oem
Create a separate section with the required parameters for each OEMFrame application. Name
the section according to the corresponding program file without a filename extension. Place
the name in square brackets.
Example
[notepad]
Parameter overview
The following parameters can be used for OEM applications:
Parameter Meaning Default value
WindowStyle_On
Defines properties to be as‐
signed to the window
0
WindowStyte_Off
Defines properties that the win‐
dow must not have
0
x
Horizontal starting coordinate of
the OEMFrame application (unit:
pixels)
0
y
Vertical starting coordinate of the
OEMFrame application (unit: pix‐
els)
0
SINUMERIK Operate on PC/PCU
23.2 Parameterizing the OEMFrame application
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 667
To Next Page
Loading...
Need help?
General
