3.6.5 WinSCP and PuTTY
Use
The programs WinSCP and PuTTY are freely-available open source programs for Windows.
WinSCP is intended especially for transferring files from and to Linux systems, PuTTY for the
remote operation of a command shell.
● WinSCP can be downloaded via the following link: http://winscp.net/eng/download.php
(
http://winscp.net/eng/download.php) (Installation Package).
WinSCP also offers a "command shell" that is limited so that commands can be issued, but
no callbacks can be answered.
● PuTTY, by contrast, offers a complete command shell.
PuTTY web page: http://www.chiark.greenend.org.uk/~sgtatham/putty (http://
www.chiark.greenend.org.uk/~sgtatham/putty)
With both programs, a service technician can log onto the NCU and carry out service tasks.
The username ‘manufact’ with the password ‘SUNRISE’ is available for the Siemens service
technician.
Starting WinSCP
WinSCP is started from Windows after the service technician has logged onto the NCU with
which he is connected using the corresponding authorization (e.g. as user "manufact" with
password "SUNRISE").
From the "Commands“ menu, select ”Open terminal” to open a command shell. There you can
carry out the service commands in the usual way.
Service and diagnostics
3.6 System diagnostics
NCU operating system
96 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
