Procedure
1. The network overview is open.
2. Press the "Company network" softkey.
The "Settings of the Company Network" window opens.
3. Press the "Change" softkey to edit settings.
17.4 Saving network settings
You have the option of saving the NCU settings as file.
In window "Save network settings: Select archive", select a target folder. The network
configuration is saved there, or an existing file is selected, which is overwritten with the new
settings.
Procedure
1. The network overview is open and you have made network settings.
2. Press the "Save NCU settings" softkey.
Window "Save network settings: Select archive" is opened.
3. Select the folder in which the network configuration is be stored. If a file
is already available, it will be overwritten.
- OR -
Press the "New directory" softkey to create a new directory.
- OR -
Press the "Find" softkey, for example, to find the archive location of the
network configuration file.
4. Press the "Find next" softkey if the file found during the search does not
correspond to the required configuration file.
5. Press the "Cancel" softkey to reject the settings.
- OR -
Press the "OK" softkey to save the network configuration.
Configuring the network
17.4 Saving network settings
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 377
To Next Page
Loading...
Need help?
General
